Don’t Forget To Leverage The Benefits of RD Gateway On Hyper-V & RDP 8/8.1


So you upgraded your TS Gateway virtual machine on W2K8(R2) to RDS Gateway on W2K12(R2) too make sure you get the latest and the greatest functionality and cut off any signs of technology debt way in advance. Perhaps you were inspired by my blog series on how to do this, and maybe you jumped through the x86 to x64 bit hoop whilst at it. Well done.

Now when upgrading or migrating from W2K8(R2) a lot of people forget about some of the enhancements in W2K12(R2). This is especially true of you don’t notice much by doing so. That’s why I see people forget about UDP. Why? Well things will keep working as they did before Windows Server 2012 RDS Gateway over HTTP or over RPC-HTTP (legacy clients). I have seen deployments where both the Windows and the perimeter firewall rules to allow UDP over 3391 were missing. Let alone that port 3391 was allowed in the RAP.  But then you miss out on the benefits it offers (a better user experience over less than great network connections and with graphics) ass well on those of that ever more capable thingy called RemoteFX, if you use that.

For you that don’t know yet:  HTTP and UDP protocols are both used preferably by RD Gateway and are more efficient than RPC over HTTP which is better for scaling and experience under low bandwidth and bad connectivity conditions. When HTTP transport channels are up (in & outgoing traffic), two UDP side channels are set up that can be used to provide both reliable (RDP-UDP-R) and best-effort (RDP-UDP-L) delivery of data. UDP also leveraged SSL via the RD gateway because is uses Datagram Transport Layer Security (DTLS). For more info RD Gateway Capacity Planning in Windows Server 2012. Further more it proves you have no reason not to virtualize this workload and I concur!

So why not set it up!?  So check you firewall rules on the RD Gateway Server and set the rules accordingly. Do the same for your perimeter firewalls or any other in between your users and your RD Gateway.

image

Under properties of your RS Gateway server you need to make sure UDP is enabled and listening on the needed IP address(es)

image

A client who connects over your RDS Gateway server, Windows Server 2012(R2) that is, and checks the network connection properties (click the “wireless NIC” like icon in the connection bar) sees the following: UDP is enabled. imageIf they don’t see UDP as enabled and they aren’t running Windows 8 or 8.1 (or W2K12R2) they can upgrade to RDP 8.1 on windows 7 or Windows Server 2008 R2! When they connect to a Windows 7 SP1 or Windows 2008R2  machine make sure you read this blog post Get the best RDP 8.0 experience when connecting to Windows 7: What you need to know as it contains some great information on what you need to do to enable RDP 8/8.1 when connecting to Windows 7 SP1 or Windows 2008 R2:

  1. “Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment\Enable Remote Desktop Protocol 8.0” should be set to “Enabled”
  2. “Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Connections\Select RDP Transport Protocols” should be set to “Use both UDP and TCP” => Important: After the above 2 policy settings have been configured, restart your computer.
  3. Allow port traffic: If you’re connecting directly to the Windows 7 system, make sure that traffic is allowed on TCP and UDP for port 3389. If you’re connecting via Remote Desktop Gateway, make sure you use RD Gateway in Windows Server 2012 and allow TCP port 443 and UDP port 3391 traffic to the gateway

Cool you’ve done it and you verify it works. Under monitoring in the RD Gateway Manager you can see 3 connections per session: one is HTTP and the two others are UDP.

image

Life is good. But if you want to see the difference really well demonstrated try to connect to Windows 7 SP1 computer with RDP8 & TCP/UDP disabled and play a YouTube video, then to the same with RDP8 & TCP/UDP enabled, the difference is rather impressive. Likewise if you leverage RemoteFX in VM. The difference is very clear in experience, just try it! While you’re doing this look a the UDP “Kilobytes Sent” stats (refresh the monitoring tab, you’ll see UDP being put to work when playing a video on in your RDP session.

image

Advertisements

Load balancing Hyper-V Workloads With High To Continuous Availability With a KEMP Loadmaster


I’m working on some labs and projects with KEMP Loadmaster load balancing appliances (LM 2400, LM-R320) That will lead to some blog post on  load balancing several workloads, which are all on Windows Server 2012 R2  Hyper-V or integrate in to Azure. The load balancers used in the labs are the virtual appliances, depending on the needs and environment these are a very good, cost effective option for production as well and depending on the version you get they scale very well. Hence their use in cloud environments, they will not hold you back at all!

To stimulate your interest in load balancing and high availability I’ve put up a video on load balancing RD Gateway services. Consider it a teaser or introduction to more about the subject.

Why use an appliance (hardware/virtual)? Well let’s look at the 2 alternatives:

  • Round robin DNS, which is also sometimes used is just to low tech for most real life scenarios and sometimes can’t be used or is less efficient which impacts scalability and performance. On top of that it doesn’t provide health checking for failover purposes.
  • I’ve also said  before that while Windows NLB  provides layer 4 load balancing out of the box it’s pretty basic. It also often causes a lot of network grief and the implementation can be tedious. This has not improved in an ever more virtualized & cloud based world. On top of that, when network virtualization comes into play you might paint yourself into a corner as those two don’t mix. But if that’s not a concern and you’re on a budget, I’ve used it with success in the past as well.